Specifications & Revisions 50

Most recent revisions and typical classifications for commonly referenced aerospace and defense specifications.

Specification Title Most Recent Revision Revision Date Typical Classifications / Additions
A-A-59166Coating Compound, Nonslip (For Walkways)Revision B4/29/2025Type II
AMS-H-6875Heat Treatment of Steel Raw MaterialsRevision CLatest as of 8/13/2024N/A
AMS2700Passivation of Corrosion Resistant SteelRevision FLatest as of 8/13/2024N/A
AMS5643Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings 16CR-4.0NI-0.30CB(NB)-4.0CU Solution Heat Treated, Precipitation Hardenable — UNS S17400Revision WLatest as of 8/13/2024N/A
BAC 5010Application of AdhesivesAC11/2/2023PSD's 1-11 thru 1-18, 8-33, 8-34 Type 118 (PR2200) — Batch/Lot #, or PSD's 1-11 thru 1-18, 8-33, 8-34 Type 89 (BMS5-105) — Batch/Lot #, or Type 54, or Type 70
BAC 5019Chromic Acid AnodizingAA5/15/2023PSD 1-5 thru 1-8, 6-135, 6-145 Class 3
BAC5423Penetrant Methods of TestingY3/13/2020PSD 8-17, 6-155
BAC5424Magnetic Particle TestingV12/15/2023(PSD 1-5, 9-10), Class ___
BAC5439Ultrasonic InspectionJ7/26/2013(PSD 9-4, 9-5, 6-23) CLASS ___
BAC5617Heat Treatment of Alloy SteelsW4/3/2019PSD 8-19, 8-21, 8-22, 8-23, 9-12, 9-13, 9-14
BAC5619Heat Treatment of Corrosion Resistant SteelL6/23/2022PSD's 1-5, 1-6, 9-15, 9-16, 9-17
BAC5632Boric Acid — Sulfuric Acid AnodizingG6/1/2023PSD 1-3, Class 1
BAC5701Cadmium PlatingR5/9/2022PSDs 8-24 & 9-8, or Type II, Class 2 PSDs 8-24 & 9-8
BAC5710Application of Special Purpose CoatingsAG3/14/2024PSD's 1-10, 1-11, 1-12, 6-144, 6-147, 9-25 Type 41 (BMS10-152) Batch/Lot #
BAC5715Silver PlatingF11/26/2013N/A
BAC5719Chemical Conversion Coatings for Aluminum and Aluminum AlloysAC5/20/2024Class D PSD 1-11, or PSD 1-11 Type II Class D, or PSD 1-11
BAC5746Nickel Plating (Electrodeposited)M6/17/2015PSDs 9-2, 9-5, 9-6
BAC5748Abrasive Cleaning, Deburring, and FinishingW5/15/2023(PSD's 1-5, 1-6, 1-7, 8-10, 8-11), TY___, CL___.
BAC5750Solvent CleaningW4/2/2025(G or FP) PSD 1-12 & 1-13
BAC5751Cleaning, Descaling and Surface Preparation of Ferrous AlloysR4/17/2025PSD 8-14, 9-22, or Type II, Class 2 PSD 8-14, 9-22
BAC5777Wash Primer, Application ofG7/8/2002PSD 8-4
BAC5786Etch Cleaning of Aluminum AlloysN1/21/2019N/A
BAC5811Application of Bonded Solid Film LubricantsW8/24/2020PSD 1-7
BAC5821Hard AnodizingG9/3/2024CL___
BAC5849Brush Plating, Anodizing, and Electrochemical EtchingR9/2/2022N/A
BAC5896Application of Aliphatic Isocyanate Polyurethane EnamelE9/26/2002PSD 8-5, 8-6
BMS5-105Urethane Adhesive for BondingM8/27/2024N/A
BMS5-25Epoxy-Amine Adhesive for Non-Structural BondingD9/20/1991(BAC5010 Type 54)
BMS5-44Temperature-Resistant, Fuel, Pressure, and Weather SealantN10/3/2016N/A
BMS5-92Adhesive, Modified Epoxy for General Purpose UseL3/22/2016(BAC5010 Type 70)
BMS5-95Pressure and Environmental Sealant-Chromate TypeU4/18/2019N/A
BMS10-152Protective Clear Coat—8/29/2018N/A
D210-12534-1Coating System, Epoxy-Polymide, Chemical and Solvent Resistant: Process for Application ofG6/3/2014PSD 1-1 thru 1-3 and 8-12 thru 8-14
D210-13540-1Waterborne Epoxy PrimerA12/14/2011N/A
D210-13540-2Application of Waterborne PrimerORG2/13/2002PSD 8-1 thru 8-3, or PSD 8-1, 8.3
D210-13649-1Application of MIL-DTL-64159 Water Dispersible Aliphatic Polyurethane Coating (Chemical Agent Resistant)D8/23/2016N/A
D8-0965Control Requirements for Fabricators of Critical PartsF7/3/2024N/A
MIL-C-8514Coating Compound, Metal Retreatment, Resin-Acid (ASG)Rev C Notice 17/9/2019N/A
MIL-DTL-53039Camouflage Coating, Solvent Based, Chemical Agent ResistantRevision F9/6/2022N/A
MIL-DTL-5541Chemical Conversion Coatings on Aluminum and Aluminum AlloysRev F Notice 22/7/2024Class 3
MIL-DTL-64159Camouflage Coating, Water Dispersible Chemical Agent ResistantRevision C3/24/2022N/A
MIL-DTL-85891Engineered Media for Removal of Organic CoatingsRevision B3/11/2019Type II
MIL-PRF-22750Coating, Epoxy, High-SolidsRev G Notice 11/31/2019w/ Amendment 1 (4/30/2014)
MIL-PRF-23377Primer Coatings: Epoxy, High-SolidsRev K Notice 19/12/2019N/A
MIL-PRF-46010Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code — S-1738Revision H11/13/2013Type I or Type III
MIL-PRF-85285Topcoat, Aircraft and Support EquipmentRev F Amend 112/10/2024Type I
MIL-PRF-85582Primer Coatings: Epoxy, WaterborneRev E Notice 19/13/2019Type II primer according to D210-13540-2ORG PSD 8-1, 8-3.
MIL-PRF-8625Anodic Coatings for Aluminum and Aluminum AlloyRev F Amend 211/23/2020AM.2, Type I, or Type II
SAE AMS-QQ-P-416GPlating, Cadmium (Electrodeposited)Notice — Adoption, Tier 23/28/2002Type II Class 2
SS8435Passivation of Corrosion Resistant SteelRevision 9Latest as of 8/13/2024N/A
SS8483Anodic Coatings for Aluminum and Aluminum AlloysRevision 13Latest as of 8/13/2024N/A
SS8521General Specification for Organic FinishesRevision 9Latest as of 8/13/2024N/A
SS8555Aircraft Paint RequirementsRevision 24Latest as of 8/13/2024N/A
SS8806Inspection, Liquid PenetrantRevision 18Latest as of 8/13/2024N/A
SS8813Nondestructive Inspection PlanRevision 4Latest as of 8/13/2024N/A
SS9213Supplement to Material and Process Specifications Index, MetalsRevision 20Latest as of 8/13/2024N/A
SS9214Alternate Organic FinishesRevision 14Latest as of 8/13/2024N/A

No specifications match your search.

VF Descriptions 40

Detailed process descriptions for Boeing VF coating and surface treatment value codes.

Value Description Extended Description
VF-1.110PRIMERApply one "mist coat" (less than 0.0006 inch dry film thickness) MIL-PRF-23377 primer in accordance with D210-12534-1 or D210-13540-1 primer in accordance with D210-13540-2. (VF-1.110)
VF-1.118EPOXY PRIMERApply one coat of MIL-PRF-23377, Type II epoxy primer in accordance with D210-12534-1 or D210-13540-1, Type II primer in accordance with D210-13540-2. (VF-1.118)
VF-1.129WHITE EPOXYApply MIL-PRF-22750 epoxy coating, Color No. 17875 white, in accordance with D210-12534-1.
VF-1.140GREEN EPOXYApply MIL-PRF-22750 epoxy coating, Color No. 34095 green, in accordance with D210-12534-1.
VF-1.149GRAY POLYApply MIL-PRF-8528, Type I polyurethane coating, Color No. 36375 gray, in accordance with BAC5896. (VF-1.149)
VF-1.164BLACK POLYApply MIL-DTL-64159 polyurethane coating, Color No. 37038 black, in accordance with D210-13649-1, or MIL-DTL-53039, Color No. 37038 black in accordance with D210-13473-1. (VF-1.164)
VF-1.170BLACK POLYApply MIL-PRF-85285, Type I polyurethane coating, Color No. 37038 black, in accordance with BAC5896.
VF-1.18YELLOW EPOXYApply MIL-PRF-22750 epoxy coating, Color No. 13538 yellow, in accordance with D210-12534-1. (VF-1.18)
VF-1.180TOPCOATApply MIL-DTL-64159 polyurethane coating, Color No. 36231 gray, in accordance with D210-13649-1, or MIL-DTL-53039, Color No. 36231 gray, in accordance with D210-13473-1. (VF-1.180)
VF-1.180 SHELFTOPCOAT SHELFPlease Handle with Extreme Care - FINISHED ASSEMBLY Mask ALL Exposed Alodined Surfaces — ___ Total Masks Mask ALL THREADS from topcoat. Paint entire assembly, excluding the masked areas and THREADS. Apply MIL-DTL-64159 polyurethane coating, Color No. 36231 gray, in accordance with D210-13649-1, or MIL-DTL-53039, Color No. 36231 gray, in accordance with D210-13473-1. (VF-1.180) Please include Rev. ___ / Lot _________ on certification.
VF-1.181SOLID FILM LUBEApply MIL-PRF-46010, Type I or Type III solid film lubricant in accordance with BAC5811. NOTE: Type III solid film lubricant applied to aluminum parts must be cured at the lower temperature (for example, 150 C) unless otherwise specified on the Boeing Philadelphia Engineering Drawing. (VF-1.181)
VF-1.182WHITE EPOXYApply MIL-PRF-22750 epoxy coating, Color No. 17925 white, in accordance with D210-12534-1. (VF-1.182)
VF-1.196GRAY EPOXYApply MIL-PRF-22750 epoxy coating, Color No. 36375 gray, in accordance with D210-12534-1. (VF-1.196)
VF-1.201ANTI-SKIDMix and apply black epoxy antiskid coating as follows: Mix together MIL-PRF-22750 epoxy coating, Components A and B, Color No. 37038 black, in accordance with D210-12534-1. Thin in accordance with D210-12534-1. Add 1 volume clean, dry, virgin 100 mesh MIL-P-85891, Type II plastic media to 3 volumes of the mixed MIL-PRF-22750 epoxy. Stir mixture until uniform. Apply 0.005 to 0.020 inch dry film thickness. (VF-1.201)
VF-1.204WALKWAY COATApply A-A-59166, Type II Deck Covering Compound (walkway coating), Color 37038 black, with 30 to 60 mesh walnut shell aggregate. Mix per manufacturer's instructions. Apply by brushing, rolling, or spraying. Dry film average thickness must be 10 to 50 mils (0.010 to 0.050 inch). Cure per specification. Adhesion testing of walnut shell grit is required on each assembly. (VF-1.204)
VF-1.35BLACK POLYApply two coats of MIL-PRF-23377 primer in accordance with D210-12534-1 or D210-13540-1 primer in accordance with D210-13540-2. Apply polyurethane coating in accordance with VF-1.164. (VF-1.35)
VF-1.59PRIMERApply one coat of MIL-C-8514 wash primer in accordance with BAC5777, and one coat of MIL-PRF-23377 primer in accordance with D210-12534-1 or D210-13540-1 primer in accordance with D210-13540-2. Contact Boeing Philadelphia Materials Engineering for topcoat instructions (34516). (VF-1.59)
VF-1.70PRIMERApply one coat of MIL-PRF-23377 primer in accordance with D210-12534-1 or D210-13540-1 primer in accordance with D210-13540-2. (VF-1.70)
VF-1.70 SHELFPRIMER SHELFMasking applied by Fluid Mech. Please inspect to ensure proper adhesion of tape prior to priming. Apply one coat of MIL-PRF-23377 primer in accordance with D210-12534-1 or D210-13540-1 primer in accordance with D210-13540-2. (VF-1.70) Do Not Unmask Please include Rev. ______ and Lot _______ on certification.
VF-1.71PRIMERApply two coats of MIL-PRF-23377 primer in accordance with D210-12534-1 or D210-13540-1 primer in accordance with D210-13540-2. (VF-1.71)
VF-1.72PRIMERApply one coat of MIL-C-8514 wash primer in accordance with BAC5777, and one coat of MIL-PRF-23377 primer in accordance with D210-12534-1 or D210-13540-1 primer in accordance with D210-13540-2. (VF-1.72)
VF-1.73PRIMERApply one coat of MIL-C-8514 wash primer in accordance with BAC5777, and two coats of MIL-PRF-23377 primer in accordance with D210-12534-1 or D210-13540-1 primer in accordance with D210-13540-2. (VF-1.73)
VF-1.79GRAY TOPCOATApply MIL-PRF-22750 epoxy coating, Color No. 36231 gray, in accordance with D210-12534-1. (VF-1.79)
VF-1.80BLACK TOPCOATApply MIL-PRF-22750 epoxy coating, Color No. 37038 black, in accordance with D210-12534-1. (VF-1.80)
VF-1.94GRAY TOPCOATApply MIL-PRF-22750 epoxy coating, Color No. 16081 gray, in accordance with D210-12534-1. (VF-1.94)
VF-10.29SURFACE PREPPrepare surfaces as follows: a. Solvent clean in accordance with BAC5750 (General Cleaning (G) or Final Cleaning, Prepaint (FP)). Optional if no visible contamination is present. b. Scuff sand with 320 to 400 grit abrasive paper or cloth, or SCOTCHBRITE abrasive mat, Type A, Very Fine. c. Solvent clean in accordance with BAC5750 (FP). d. Apply a mist coat of primer in accordance with VF-1.110. Omit if the next required coating is primer.
VF-2.1CAD PLATECadmium plate in accordance with BAC5701. (VF-2.1)
VF-2.36CAD PLATECadmium plate in accordance with BAC5701, Type II, Class 2.
VF-3.0CHEM TREATChemical treatment in accordance with BAC5719 or MIL-DTL-5541. (VF-3.0)
VF-3.0 (TUBES)CHEM TREATPlease handle with care. No nicks, dents or scratches permitted on edges or outside surface. Please clean to ensure no grit or smut exists after alodine, especially in the inside diameter. Chemical treatment in accordance with BAC5719 or MIL-DTL-5541. (VF-3.0) After chemical treatment please individually wrap each tube in protective paper prior to inserting into shipping tube. Please include Rev. __, Lot ______ and Mat'l Cert. No. _________ on certification.
VF-3.1ANODIZEUse Boeing approved source. Chromic acid anodize in accordance with MIL-PRF-8625, Type I. (VF-3.1)
VF-3.3CHEM TREATChemical treat by either of the following: a. Chemical treatment in accordance with BAC5719 or MIL-DTL-5541; b. Chromic acid anodize in accordance with MIL-PRF-8625, Type I; or c. Sulfuric acid anodize in accordance with MIL-PRF-8625, Type II. (VF-3.3)
VF-3.46ANODIZEChromic acid anodize in accordance with BAC5019. (VF-3.46)
VF-3.49CHEM TREATChemical treatment in accordance with MIL-DTL-5541, Class 3, or BAC5719, Class D. (VF-3.49)
VF-3.51ANODIZEAnodize by either of the following: a. Chromic acid anodize in accordance with MIL-PRF-8625, Type I; b. Chromic acid anodize in accordance with BAC5019, Class 3; or c. Boric-sulfuric acid anodize in accordance with BAC5632, Class 1. (VF-3.51)
VF-3.55BRUSH CHEM TREATBrush applied chemical treatment in accordance with BAC5719, Type II, Class D or MIL-DTL-5541, Class 3. (VF-3.55)
VF-3.6BRUSH CHEM TREATBrush applied chemical treatment in accordance with BAC5719, Type II. (VF-3.6)
VF-6.0PASSIVATEPassivate in accordance with BAC5751. (VF-6.0)
VF-6.2CAD PLATECadmium plate in accordance with BAC5701. Nickel flash in accordance with BAC5746 before cadmium plating is optional.
VF-6.3PASSIVATEPassivate in accordance with BAC5751, Type II, Class 2. (VF-6.3)

No VF descriptions match your search.